IMSA "MFT" and "MFTB" Deep Hole Drilling Machines are dedicated to cylindrical parts such as transmission housings, cam shafts, gear shafts, injectors, lubricators, couplings, valves, drive valves ... in general, all solids of revolution with a deep drilling in their axis.
These deep hole drilling machines are customized for drilling depth, diameters, number of spindles; our range starts from machines for small lots to high-productivity lines. We also propose different solutions for automated load, as a completion to the supply.
IMSA machines for centerline drilling of cylindrical workpieces use two different drilling methods depending on the diameters:
Learn more: the Deep Drilling Process
THE ADVANTAGES OF IMSA CENTERLINE DEEP DRILLING MACHINES
*New* centerline deep hole drilling machine for steel shaft and other cylindrical parts that have to be drilled on their rotation axis.
Centerline deep hole drilling machine for steel shaft and other cylindrical parts that have to be drilled on their rotation axis.
Centerline deep hole drilling machines. These "2T" machines are equipped with a single carriage with two spindles, enabling you to drill 2 identical parts in each drilling cycle.
Centerline deep hole drilling machines. These "2Ti" machines are equipped with 2 independent drilling carriages that enable you to drill 2 different workpieces in each cycle.
Centerline deep hole drilling machine for cylindrical parts, especially for the medical industry. Small diameter drilling, workpiece in counter-rotation.
Centerline deep hole drilling machine for cylindrical parts, especially for the medical industry. Small diameter drilling, workpiece in counter-rotation.
Centerline deep hole drilling machine for steel shaft and other cylindrical parts that have to be drilled on their rotation axis until Ø32, such as: gear shafts, aerospace industry, flanges for industrial applications.
Centerline deep hole drilling machine for steel shaft and other cylindrical parts that have to be drilled on their rotation axis until Ø43, such as: gear shafts, aerospace industry, flanges for industrial applications.
*New* centerline deep hole drilling machine specific for aeronautical shafts and other cylindrical parts that have to be drilled on their rotation axis.
Centerline deep hole drilling machine for cylindrical parts that have to be drilled on their rotation axis. In the intermediate diameter range between the Gun Drilling and the BTA Drilling, we propose a Double-Setup flexible solution we called IMSA “GDK” System. This enables you to better take advantage of both tool types.
Centerline deep hole drilling machine for steel shafts and other cylindrical parts that have to be drilled on their rotation axis until Ø 51mm (solid) – Ø 65mm (in counterboring).
Centerline deep hole drilling machine for steel shafts and other cylindrical parts that have to be drilled on their rotation axis. Deep drilling method: BTA/STS.
Centerline deep hole drilling machine for steel shafts and other cylindrical parts that have to be drilled on their rotation axis. Deep drilling method: BTA/STS.
Centerline deep hole drilling machine for steel shafts and other cylindrical parts that have to be drilled on their rotation axis. Deep drilling method: BTA/STS.