“Deep Drilling and Milling in Synergy”

GUNDRILLING AND MILLING MACHINE FOR MOLDS AND LARGE BLOCKS

• The MF2000EVO machining center is designed for processing giga-tools weighing up to 30 / 40 / 50 tons, depending on the table version selected.
  The rotary table features continuous controlled rotation and a 1,200 mm travel toward the machining unit.
• Orthogonal drilling, drilling with single angle, and double‑inclined drilling are all possible thanks to the 360° (0.001°) rotary table and the +20° / -20° (0.001°) tilting ram.
• 4‑side machining: the EVO series features a new table design combining high load capacity with compact dimensions, making it easier to machine four faces in one single setup.
• The vertical gantry structure ensures maximum rigidity: stress levels are four times lower and rigidity is sixteen times higher, compared to structures with bottom-supported columns. This guarantees consistent performance at any vertical position along the Y‑axis.
• DEEP DRILLING:  Maximum single‑cycle drilling depth: 2,000 mm. Optimal drilling diameters: 5-50 mm from solid using the gun drilling method.
• “EVO” Series: The MF2000EVO deep‑drilling spindle provides 15 kW, 4,200 rpm, and features liquid cooling.
• The machine integrates several IMSA‑specific functions for advanced control of the deep‑drilling process.
• Temperature, pressure, and coolant cleanliness are key parameters for successful deep drilling. MF2000EVO includes dedicated solutions to precisely manage all three.
• MILLING UNIT: MF2000EVO is equipped with an ISO50 milling head, mounted on the same tilting machining unit, positioned beside and independent from the deep‑drilling spindle. This independent‑axis system, a hallmark of IMSA machines, allows switching from gun drilling to milling (and back) in just 8 seconds, fully automatic, without any operator involvement.
• Horizontal milling travel: 1,100 mm, achieved by combining the 600 mm W‑axis headstock movement and the 500 mm Z‑axis milling quill movement.
• “EVO” Series: The MF2000EVO features a liquid‑cooled ISO50 milling spindle, with 45 kW, 4,500 rpm, and 430 Nm of maximum torque. This new machine ensures excellent performance and machining flexibility.